How to reset an Arris TM602 Digital Phone Terminal
Learn how to reset an Arris TM602 Digital Phone Terminal (DPT) with these tips. If you find that you have no dial tone on your home phones, you may be able to restore your phone service with a simple reset of your Digital Phone Terminal. This guide refers directly to the Arris TM602 model seen in the diagrams below. Click the following links if your service is provided via an alternative model such as the Arris TM502, Motorola SBV 5120 or Motorola SBV 5220 Digital Phone Terminals.
How to reset your Arris TM602 Digital Phone Terminal
Follow these steps to reset your Arris TM602 Digital Phone Terminal by disconnecting the power supply:
Once you have located and identified your Digital Phone Terminal, please disconnect the black power cable from the back of the DPT
Wait thirty seconds and then restore power to the DPT byreconnecting the power cable and the battery
Wait two to three minutes for theTEL1andTEL2lights to start flashing simultaneously before testing the dial tone on your phones. If your phone service is still unavailable after an additional five minutes, pleaseContact Us
Did you know? While we have provided this support information, we want to ensure that our customers receive the best possible support for their third-party hardware and software by speaking with the experts. The best way to resolve your third-party issue is to use support resources from the original manufacturer or developer. If out support information does not answer your question, please visitArris Support.
Visual Guide: TM602 power supply
Here is a visual guide to resetting your Arris TM602 DPT.
Step 1: Locate the power cable on the Digital Phone Terminal
Step 2: Remove the power cable
Performing a pinhole reset of the TM602
Follow these steps to reset your Arris TM602 Digital Phone Terminal by performing a pinhole reset.
Locate your Digital Phone Terminal
Locate the small hole labelledReseton the back of the DPT (see photos below)
Using a pin, depress the button located at the base of this hole for twenty seconds.
You will see the lights on the modem begin to flash as the system resets.
Wait five to ten minutes for the DPT to come online (Power, DS, US, and Online lights will stop flashing and return to a solid state to indicate an online status)
Check your phones for a functioning dial tone.
Did You Know
If your phones still do not have access to a working dial tone or the lights indicated above continue to flash, please refer to theHow To Remove the Battery from your DPTguide which will walk you through the process of fully resetting your Digital Phone Terminal.
Visual Guide: TM602 pinhole reset
Here is a visual guide that you can use to perform a pinhole reset of your Arris TM602 Digital Phone Terminal.
Pinhole reset for the Arris TM602 Digital Phone Terminal