Eligibility
To use Fibre+ WiFi Pods, you will need:
Do I need pods?
Do you have rooms in your home with poor WiFi connectivity? If so, pods may be a good solution. Pods help extend the range of WiFi coverage in your home to hard-to-reach areas, or areas with poor WiFi signal.
Will pods improve my Internet speed?
No, pods won't increase your Internet speed, and are not intended to provide the maximum speed of your Internet subscription tier. Pods will only help you connect in areas where you could not previously connect to your in-home WiFi.
How do I get Shaw WiFi Pods?
You can order Pods online at shaw.ca, or by contacting a Shaw agent. BlueCurve Pods are available in a 3-Pack, and Fibre+ WiFi Pods are available individually. You can rent a maximum of three 3-Packs per account or up to six Fibre+ WiFi pods.
Learn more: Fibre+ WiFi Pods FAQ
Specifications
The chart below includes an overview of hardware specifications for our WiFi Pods.
Feature |
BlueCurve Pods (Gen. 1 - SC1-A) |
Fibre+ WiFi Pods (Gen. 2 - XE2-SG) |
WiFi |
Yes (802.11 a/b/g/n/ac) |
Yes (802.11 a/b/g/n/ac) |
Dual-band |
Yes |
Yes |
Tri-band |
No |
Yes |
Antennas |
2x2 antenna for 2.4GHz and 5GHz |
4x4 MIMO 802.11 a/n/ac 5 GHz Radio 1
2x2 MIMO 802.11 a/n/ac 5GHz Radio 2
2x2 MIMO 802.11 b/g/n 2.4 GH |
Ethernet |
1 (one) Gigabit Ethernet port |
2 (two) Gigabit Ethernet ports |
Manufacturer |
Sagemcom |
Sagemcom |
Model |
SC1-A |
XE2-SG |
Width |
6.4 cm / 2.52 in |
9.6 cm / 3.78 in |
Depth |
7.9 cm / 3.11 in |
4.0 cm / 1.57 in |
Height |
5.8 cm / 2.29 in |
8.7 cm / 3.43 in |
LED Status |
Flashing: Not connected to Gateway, or not yet activated
Off: Connected to Gateway |
Flashing Green: Not connected to Gateway
Flashing Blue: Onboarding Process
Flashing White: Optimization Process
Off :Connected to Gateway |
Operating Requirements |
Temperature: 32 - 95 F (0 - 35 C)
Humidity: 10% - 90% relative
Power: 110 - 240VAC 50/60Hz |
Temperature: 32 - 104 F (0 - 40C)
Humidity: 10% - 90% relative
Power: 110 - 240VAC 50/60Hz |