Find information on how to set up your new Shaw Fibre+ Gateway (XB6 or XB7), as well as how to change settings including your WiFi password and network name that you are using to broadcast your local WiFi connection.
Set up of your Fibre+ Gateway is done in just a few easy steps, all from your mobile device. Click your modem below for detailed setup instructions.
The best way to access your Gateway settings is with the BlueCurve Home app. You can change various settings on the modem, everything from WiFi passwords to parental controls, and more advanced settings—all from a convenient mobile app, or from your computer.
A message is shown confirming that you'd like to restart your Gateway.
Select Restart to confirm.
Your Gateway will now restart.
Note: This can take up to 10 minutes, during which you won't be able to use your home network, connect to the Internet, or stream video on certain TV boxes.
How to restore factory default settings
Using the Admin Tool, you can perform a factory reset which will delete all of your custom configurations, including any changes you made to your WiFi name, network password, and wireless channel settings.
Note: All of your settings will be lost. This should only be done on rare occasions or if advised by a Shaw support agent.
Enter 10.0.0.1 into the address bar of your Internet browser.
Log in to the modem with the following information:
Password: password (These are the default login credentials for the admin tool. If you have previously changed your password, use that instead).
Choose Troubleshooting > Reset/Restore Gateway from the menu on the left.