Netgear N600 WiFi router
Learn about the various light sequences and functions of the Netgear N600 wireless router.
Netgear N600 Router |
Power |
Solid Green: The router is ready
Blinking Green: The firmware is updating or someone pressed the Reset button.
Off: Power is not supplied to the router
|
Internet |
Solid Green: The Internet connection is ready.
Off: No Ethernet cable is connected between the router and the modem.
|
WiFi |
Solid Green: The 2.4GHz WiFi radio is operating.
Blinking: The router is sending or receiving WiFi traffic
Off: The 2.4GHz radio is off
|
Ethernet
Lan 1-4
|
Solid: A powered-on device is connected to the Ethernet port
Blinking: The port is sending or receiving traffic.
Off: No device is connected to the Ethernet port
|
USB |
USB 3.0 Storage Port and USB 2.0 Printer Port are deactivated. |
WPS |
Solid Green: Someone used WPS to connect to the WiFi network
Blinking (Two Minutes): Someone pressed the WPS button on the router to join the WiFi network
|
Rear View |
 |
WPS Button
|
The WPS button lets you use WPS to join the WiFi network without typing the WiFi password. |
WiFi On/Off
|
Pressing the WiFi On/Off button for two seconds turns the WiFi radios on and off |
USB Port
|
Deactivated |
Ethernet
1-4
|
Connects the modem to a computer or third-party device (router, Ethernet hub, etc.) |
WAN Port
|
Connection point for the cable that runs either into a modem for connecting to the Internet. |
Reset Button
|
Resets the modem to factory default settings |
Power On/Off |
Turns the power on or off for the router |
Power |
Connects modem to the power supply |
Details / Specifications
Here are some additional details about the Netgear N600 WiFi router.
Details/Specifications |
Docsis |
N/A |
WiFi |
Yes |
Wireless Standard |
802.11 b/g/n |
Operational Frequency |
2.4GHz, 5.0 GHz
|
Ethernet |
10/100 Mbps |
WPS Available |
Yes |
Security |
WEP, WPA, WPA2 |
Router Settings Login URL
|
http://192.168.0.1/ |