Bridge mode and DMZ or Secondary IP

[tailtwister]

Is it possible with the Arris XB6 to have a device in the DMZ and have the unit in Bridge mode at the same time?   Or, better still, have the device in Bridge mode but also have a secondary IP address for a 2nd network?

[shaw-tony]

Hey tailtwister,

This is a bit outside of our scope of support. Personally, I don't believe a DMZ can be active when the modem is bridged. However, if you do have a secondary IP enabled, bridging the modem will give you access to two IPs for two separate networks.

Hope that helps,

Tony | Community Mod.

[tailtwister]

Thanks, Tony.

We got it all setup by adding the secondary IP which did what I needed.

[#4]

You can bridge the modem to access to 2 IPs (192.168.0.1) for two separate networks.