Shaw's Routing - Through European Servers to US from Calgary ??

vmonkey
Grasshopper

So is it normal to have my routing through servers in EUROPE from Calgary when I am connecting to my broker which is located in the United States?

Here is my traceroute

Tracing route to cdc1.ibllc.com [8.17.22.31]
over a maximum of 30 hops:

1 * 9 ms 9 ms XXXXXXXXX
2 10 ms 10 ms 11 ms rc3no-be121-1.cg.shawcable.net [64.59.133.165]
3 25 ms 25 ms 26 ms rc2wt-be100.wa.shawcable.net [66.163.75.233]
4 28 ms 28 ms 27 ms rc1wt-be18-1.wa.shawcable.net [66.163.64.81]
5 32 ms 28 ms 28 ms sea-b2-link.telia.net [62.115.146.72]
6 30 ms 27 ms 28 ms level3-ic-335731-sea-b2.c.telia.net [213.248.68.49]
7 * 56 ms 57 ms ae-1-3515.ear2.Chicago2.Level3.net [4.69.134.46]
8 57 ms 57 ms 56 ms INTERACTIVE.ear2.Chicago2.Level3.net [4.71.248.158]
9 56 ms 56 ms 57 ms 8.17.22.31

Trace complete.

0 Kudos
8 Replies

Re: Shaw's Routing - Through European Servers to US from Calgary ??

vmonkey
Grasshopper

Is there anyone from Shaw that can help me with this?  I'd be happy to provide more information.

0 Kudos
Reply
Loading...

Re: Shaw's Routing - Through European Servers to US from Calgary ??

Not applicable

That isn't going through Europe..

sea is Seattle.  Plus each time going across the ocean would add a significant bump in the time (ms) it takes.

That is just passing through Telia in Seattle to get to the Level3 network.

Reply
Loading...

Re: Shaw's Routing - Through European Servers to US from Calgary ??

vmonkey
Grasshopper

thank you kevinds that is helpful.  A few of the geoip sites had the sea site located in France - I also asked because the ping was higher (~20ms) in this location than a previous address that we lived at.    

I am happy with Shaw except for this high ping to the broker (~60ms) and to the data feed provider (~80ms).  

Any ideas? 

0 Kudos
Reply
Loading...

Re: Shaw's Routing - Through European Servers to US from Calgary ??

Not applicable

This is my route.

Tracing route to 8.17.22.31 over a maximum of 30 hops

1 <1 ms <1 ms <1 ms untangle.gateway.com [192.168.1.1]
2 23 ms 11 ms 9 ms 70.76.x.x
3 11 ms 11 ms 8 ms 24.244.8.141
4 24 ms 22 ms 18 ms rc4fs-tge0-14-0-15.mt.shawcable.net [66.163.75.170]
5 28 ms 27 ms 30 ms rc3ec-hge0-17-0-7.il.shawcable.net [66.163.75.85]
6 27 ms 32 ms 36 ms ae-1.a00.chcgil09.us.bb.gin.ntt.net [168.143.229.37]
7 * 29 ms 29 ms Xe-9-1-edge2.nwr1.level3.net [4.68.111.69]
8 * * * Request timed out.
9 38 ms 39 ms 36 ms INTERACTIVE.ear2.Chicago2.Level3.net [4.71.248.158]
10 38 ms 38 ms 34 ms 8.17.22.31

Trace complete.

Reply
Loading...

Re: Shaw's Routing - Through European Servers to US from Calgary ??

vmonkey
Grasshopper

Thank you vanadiel - this is helpful - your route is taking a faster path through Shaw's networks.  What is your location?

Can someone from Shaw support weigh in here?  

0 Kudos
Reply
Loading...

Re: Shaw's Routing - Through European Servers to US from Calgary ??

Not applicable

My location in Ontario.

0 Kudos
Reply
Loading...

Re: Shaw's Routing - Through European Servers to US from Calgary ??

shaw-tony
Moderator
Moderator

Hey vmonkey,

Based on the traceroutes, it is going through a Seattle server. I ran a quick traceroute from our Vancouver office and get about 31 ms when connecting to Seattle. After that, it may be due to a firewall (protection from any DDOS attacks) that seems to slow things down. Therefore, I am getting about 63 ms when it reaches Chicago. Unfortunately, once it leaves the Shaw network, we don't have much control over which route it takes. Generally, it will take the most reliable route possible.

Cheers,

Tony | Community Mod.

0 Kudos
Reply
Loading...

Re: Shaw's Routing - Through European Servers to US from Calgary ??

Not applicable

shaw-tony wrote:

Hey vmonkey,

 

Based on the traceroutes, it is going through a Seattle server. I ran a quick traceroute from our Vancouver office and get about 31 ms when connecting to Seattle. After that, it may be due to a firewall (protection from any DDOS attacks) that seems to slow things down. Therefore, I am getting about 63 ms when it reaches Chicago. Unfortunately, once it leaves the Shaw network, we don't have much control over which route it takes. Generally, it will take the most reliable route possible.

 

Cheers,

Tony | Community Mod.

True, but Shaw has control over which routes it takes when leaving the Shaw network.

For example entering the US in Seattle or Chicago

0 Kudos
Reply
Loading...
TALK TO US
We're here to help