I find five minutes skip too much and 30 seconds not enou...

[Lmcivor]

I find five minutes skip too much and 30 seconds not enough. Is it possible to program 3.5min using 0-3-3-0 ? Or are there only two options available? 

[mdk]

@Lmcivor -- a previous message on this thread was:

• Press EXIT - EXIT - EXIT - 0 - 0 - 3 - 0 on the BlueCurve TV remote

Note the "30" as the last two digits.  What happens if you instead use "20" as the last two digits?

Or, just "talk" to the BlueCurve remote-control: skip back 20 seconds 

[Joanne612]

We had this same problem happen today in July 2023 and turning off the PVR with the  blue button. Pressed exit-exit-exit 0030 then turn the PVR back on using the blue button and it worked —- for now 

[Not49p]

That's the ticket. Only works if the PVR is off. If you try it while the TV is on, the Exit x3 0030 with attempt to change the channel. Turn off the PVR/TV and the sequence works like a charm.

[Skoka]

Customers preferences are not important to Shaw!

[stieda]

So frustrating! 

[stieda]

I restarted the wifi box and it works at 30” now. 

[mdk]

@stieda & @Skoka & @Not49p & @Joanne612 & @Lmcivor -- since you have the new Rogers remote-control, use its capability:.

1. Move it (or just pick it up).
2. Hold-down the lit-up blue-coloured button.
3. Speak "minute" or "two minutes" or "three minutes".
4. Release the blue-coloured button.

Commercials seem to come in bunches.  So, saying "two minutes" seems to work best for me.  🙂