How to reset an Arris TM602 Digital Phone Terminal
Learn how to reset an Arris TM602 Digital Phone Terminal (DPT) with these tips. If you find that you have no dial tone on your home phones, you may be able to restore your phone service with a simple reset of your Digital Phone Terminal. This guide refers directly to the Arris TM602 model seen in the diagrams below. Please click the following links if your service is provided via an alternative model such as the Arris TM502, Motorola SBV 5120 or Motorola SBV 5220 Digital Phone Terminals.
While we have provided the following support information, we want to ensure that our customers receive the best possible support for their third-party hardware and software by speaking with the experts. The best way to resolve your third-party issue is to use support resources from the original manufacturer or developer. If the following information does not answer your question, please visit Arris Support.
How to reset your Arris TM602 Digital Phone Terminal
Please follow these steps to reset your Arris TM602 Digital Phone Terminal by disconnecting the power supply:
Once you have located and identified your Digital Phone Terminal, please disconnect the black power cable from the back of the DPT
Wait thirty seconds and then restore power to the DPT by reconnecting the power cable and the battery
Wait two to three minutes for the TEL1 and TEL2 lights to start flashing simultaneously before testing the dial tone on your phones. If your phone service is still unavailable after an additional five minutes, please Contact Us
Follow these steps to reset your Arris TM602 Digital Phone Terminal by performing a pinhole reset.
Locate your Digital Phone Terminal
Locate the small hole labelled Reset on the back of the DPT (see photos below)
Using a pin, depress the button located at the base of this hole for twenty seconds.
You will see the lights on the modem begin to flash as the system resets.
Wait five to ten minutes for the DPT to come online (Power, DS, US, and Online lights will stop flashing and return to a solid state to indicate an online status)
Check your phones for a functioning dial tone.
Did You Know
If your phones still do not have access to a working dial tone or the lights indicated above continue to flash, please refer to the How To Remove the Battery from your DPT guide which will walk you through the process of fully resetting your Digital Phone Terminal.