30 second skip has disappeared Neither 3x exit 0030 shaw...

[HemiRR]

30 second skip has disappeared

Neither 3x exit 0030 shaw or 3x exit 0030 OK restores the 30 ssecond skip

[HemiRR]

Problem solved, unplug unit for 15 seconds plug back in 30 second skip restored without reentering sequence

[spendshaw_ca]

I did the exit-exit-exit 0030 and tested it and it didn't work until after I went into settings/help and restarted the receiver

[Paraknob]

Followed your advice an Voila, 30 seconds skip forward back working. no programing needed. Thank you so much. I watch football games that I recorded and 30 forward work let me speed the game along. 30 seconds is just right to skip from the end of one play to the start of the next.

[Deadly1]

Thank you for this tip. Worked for me. Cant understand how Rogers/ Shaw can’t find a better system than this crappy Ignite TV

[mdk]

@Deadly1 -- Cant understand how Rogers/ Shaw can’t find a better system

Not a "monopoly", but it is a "duopoly" -- use the Shaw/Rogers/Comcast box, or use the TELUS box. 

AFAIK, there are no other competitors.

[SantaTom]

Try pushing the 'A' button on your remote and then 'restart'.

Turn your TV off.

Push Exit - Exit - Exit -0-0-3-0 then okay button. 

Should work.

[donaldbird]

This worked for me.  Thank you for posting this.

[Rascalham]

The problem was also solved, unplugged the unit for 15 seconds and plugged it back in, the 30-second skip was restored without reentering the sequence.

[mdk]

@kenohrn -- pick up the Rogers remote control. Hold-down the blue-coloured lit-up button, and say "30 seconds", or "3 minutes", then release the button. Anything you recorded should accept your command.

"By Your Command" -- Battlestar Galactica.  🙂