>> 4K is the term used for UHD displays that can display...

mdk
Legendary Grand Master

>> 4K is the term used for UHD displays that can display images with a resolution between 3840 by 2160 pixels up to 4096 by 3112 pixels.

This is what I like about the Internet -- if you don't like some information that you find on one web-page, you can find conflicting information on a different web-page.

I think that UHD displays have a recommended feed of 3840, for optimal picture. Of course, when the feed is higher than 3840, the UHD display will "down-scale" to display 3840, unlike a 4K display, that does not need to down-scale a 4096 feed.

>> Wow, ain't nobody got no time for this conversation!

??? Double-negatives are complicated to understand.

0 Kudos
Reply
Loading...

Yeah, that's the point. Anyway, this is completely off to...

dalehuhtala
Grasshopper

Yeah, that's the point.

Anyway, this is completely off topic and is not related to my original post. My point is this is not an opportunity to try and impress the community with your detailed knowledge of resolutions...it was to see if everybody has poor picture quality or not - and decide if there's anything I can do about it.

0 Kudos
Reply
Loading...

, technically you are correct, but a big caveat is that y...

g-idk
Master

@mdk , technically you are correct, but a big caveat is that you can not buy a true 4k native resolution television in the commercial market, all the televisions are called 4k even though they are 3840 native resolution.  

What is the difference between 4K and Ultra HD?

True 4K refers to a resolution of 4096 x 2160, which is used by digital cinema projectors. UHD in the consumer world refers to a resolution of 3840 x 2160, which is the resolution you get on TVs.

So technically, 4K is the wrong term, but the two are pretty much interchangeable.  Sorry @dalehuhtala for posting another off topic, just needed to put my 2 cents in. I was bored.  

0 Kudos
Reply
Loading...

Correct. True 4K is found in digital cinema projectors an...

rstra
Grand Master

@g-idk  Correct. True 4K is found in digital cinema projectors and UHD is for the consumer market. 

To stay on topic, I seriously doubt that the issue that @dalehuhtala is experiencing has anything to do with his TVs. 

Reply
Loading...

That is correct. The industry has no issues with 4K resol...

dalehuhtala
Grasshopper

That is correct. The industry has no issues with 4K resolutions and standards at this point, so this discussion has nothing to do with anything I've been experiencing.

I have confirmed several times all my configurations are correct and optimal. 

Interestingly, I went to a friend's house to see what his picture quality was like as a comparison. He lives in another city, has even faster internet service (750 vs my 500), uses everything from Shaw in stock mode, TV box sits right beside the Ignite router - and his picture quality is just as bad as mine. Exactly the same.

So...the Ignite TV/Bluecurve/whatever you want to call it is simply a low-quality service. These are NOT proper HD level quality videos and everybody just seems to have accepted it for some reason. Clearly, Rogers and Shaw are providing the lowest bandwidth service they can possibly get away with and raking in the profit. Compare a movie on TV to one on Netflix some day and look at the shocking difference in quality. If you were paying for 4K Netflix streaming for $25/month and then the quality suddenly slipped to what Ignite TV offers, you would be angry! When you consider that this service (for me at least) costs almost $200/month, people should be incensed! I know I am. But nobody seems to be talking about it - they just accept it and roll over.

I have no choice but to cancel my services and find alternatives to "cable" since the quality is so terrible. Here in Canada, there is no real competition so we are the sheep in this situation.

Make complaints if you care...

0 Kudos
Reply
Loading...

Weird. Mine is as clear as anything else: Netflix, Prime,...

rstra
Grand Master

@dalehuhtala  Weird. Mine is as clear as anything else: Netflix, Prime, Disney+ and my MILs OptikTV, but again, I have cable connected boxes. Too bad Rogers wouldn’t give you that equipment to try. 

0 Kudos
Reply
Loading...

The new TV boxes are bas for image quality. We still have...

Cbncanada
Grasshopper

The new TV boxes are bas for image quality. We still have are old boxes as well as the new ones. When we switch back and forth the difference is amazing. The old boxes are far superior.

0 Kudos
Reply
Loading...

interesting that you were allowed to keep Ignite and olde...

rstra
Grand Master

@Cbncanada interesting that you were allowed to keep Ignite and older boxes together on your account.

0 Kudos
Reply
Loading...

Just to be clear. It is not possible to view programming...

michaelstein
Grasshopper

Just to be clear.

It is not possible to view programming on both of the ignite and legacy equipment at the same time and/or from the same residence.

Most likely the person has two accounts or a home and/or a business account or viewing from another address, who knows.

It is two, different, delivery methods entirely between ignite and legacy.

AFAIK, Rogers is "attempting" to migrate all of their residential users to the ignite system as much as they can, so that they

can discontinue the legacy delivery method altogether, at least for residential users. To this day, as of this writing, they are still

continuing to deliver programming to legacy equipment for business accounts (mostly for pubs, bars or restaurants) - DCX3200-M, I think?

I kept on to my previous DCX3400, but it is not connected via a coax, and it wouldn't matter, because it would not receive any programming.

I haven't attempted to view previously recorded programs from the disconnect unit.

It is still possible to view programming solely on legacy equipment (DCX3200 or 3510) on residential accounts,

but for how long, is another question, but not on both: Ignite and legacy at the same time.

 

0 Kudos
Reply
Loading...

wrote: It is still possible to view programming solely on...

mdk
Legendary Grand Master

@michaelstein wrote: It is still possible to view programming solely on legacy equipment (DCX3200 or 3510) on residential accounts, but for how long, is another question,

I agree. If you have such "legacy" equipment on your account, you can continue to watch TV. My Gateway PVR is still in use. 

However, from: https://support.shaw.ca/t5/tv-articles/about-legacy-tv-box-upgrade-program/ta-p/9242

Shaw/Rogers will not allow a customer to activate those legacy boxes onto an account.

 

 

0 Kudos
Reply
Loading...