I am trying to set up an ipad on POP email and following the normal protocol is not working. I also have a laptop using the shaw webmail and was able to use both until yesterday but today they don't send, but both receive emails.
Solved! Go to Solution.
Hey trulaw,
Thank you for reaching out! It may certainly be an issue with the IP address or your email password is not strong enough. I'd recommend updating your password to something very strong and to set up your iPad under ActiveSync. Let me know how it goes!
Cheers,
Tony | Community Mod.
@trulaw -- receiving E-mail should not be a problem, because you are sending your Shaw ID & password to Shaw's mail-server to authenticate. But, a stronger password might help.
However, when sending E-mail from a "non-Shaw" IP-address to Shaw's E-mail server, you do need to authenticate (again with your ID/password) before the server will accept your outgoing messages. So, check that your E-mail program is configured to authenticate when sending. Again, a stronger password may help.
Hey trulaw,
Thank you for reaching out! It may certainly be an issue with the IP address or your email password is not strong enough. I'd recommend updating your password to something very strong and to set up your iPad under ActiveSync. Let me know how it goes!
Cheers,
Tony | Community Mod.
@trulaw -- receiving E-mail should not be a problem, because you are sending your Shaw ID & password to Shaw's mail-server to authenticate. But, a stronger password might help.
However, when sending E-mail from a "non-Shaw" IP-address to Shaw's E-mail server, you do need to authenticate (again with your ID/password) before the server will accept your outgoing messages. So, check that your E-mail program is configured to authenticate when sending. Again, a stronger password may help.