Jump to solution

Shaw Hitron CGNM 2250 router/modem: enable USB port?

lagagnon
Grasshopper

I have a Shaw Hitron CGNM 2250 modem/router. I really need to be able to access my USB storage drive (2TB HDD) as a network device. There are 2 USB ports on the back of this modem and the full manual for that device (available here: https://www.midco.com/contentassets/a8faa9563b6b49e5b244ef7418c1b314/hitron-cgnm-2250-modem-user-gui... ) shows that there should be an "Admin > USB Storage" screen to setup the network drive.

It seems as though Shaw has disabled the availability of the USB port to be used for this purpose, probably by changing the firmware of this router.

If that is the case is there any way to have this feature enabled, as it really cripples this router for my purposes.

Labels (1)
1 Solution

Accepted Solutions
Jump to solution

Hi   according to this support page https://support.shaw....

g-idk
Master

Hi @lagagnon  according to this support page https://support.shaw.ca/t5/internet-articles/hardware-information-hitron-cgnm-2250-docsis-3-0-wifi-m... it does indicate that the usb is disabled. I personally am not aware of a method to activate them.  If I'm wrong I'm sure someone will chime in.  Hope this answers your question.  Good luck and stay safe. 

View solution in original post

Reply
Loading...
22 Replies
Jump to solution

Hi   according to this support page https://support.shaw....

g-idk
Master

Hi @lagagnon  according to this support page https://support.shaw.ca/t5/internet-articles/hardware-information-hitron-cgnm-2250-docsis-3-0-wifi-m... it does indicate that the usb is disabled. I personally am not aware of a method to activate them.  If I'm wrong I'm sure someone will chime in.  Hope this answers your question.  Good luck and stay safe. 

Reply
Loading...
Jump to solution

-- I really need to be able to access my USB storage driv...

mdk
Legendary Grand Master

@lagagnon -- I really need to be able to access my USB storage drive (2TB HDD) as a network device. 

Do you have one computer on your local network that is always powered-on, and not "sleeping" ?

If so, connect the USB-device to a USB3 (or USB2, if you have no USB3) port on that computer, and use Windows Networking to "share" this device, in "read/write" mode, across your local network. Then, each of your other devices can "map" the device to a drive-letter.

 

0 Kudos
Reply
Loading...
Jump to solution

I'm also having the same problem. Does anybody solved it?

helderc
Grasshopper

I'm also having the same problem.

Does anybody solved it?

0 Kudos
Reply
Loading...
Jump to solution

I have the same modem and usb file sharing works for me u...

2110centre
Grasshopper

I have the same modem and usb file sharing works for me using a usb stick. The modem will only support devices up to 500ma. if you have a spinning HD it's probably pulling more than that. The drive needs to be FAT 16 FAT32 or NTFS

0 Kudos
Reply
Loading...
Jump to solution

the link to the usb device admin page is hidden but i was...

2110centre
Grasshopper

the link to the usb device admin page is hidden but i was able to get to it by changing the url to 

http://192.168.0.1/index.htm#admin_usb/m/4/s/6

You might need to change the ip if yours is different

Reply
Loading...
Jump to solution

Were you able to set up your USB drive on the Shaw Hitron...

goodnewz
Grasshopper

Were you able to set up your USB drive on the Shaw Hitron 2250 modem?
I've checked every link in the modem settings and cannot find how to set-up and use a USB flash drive storage.

I talked to Shaw tech support rep in India and she said that she cannot help and that I was on my own to figue it out.

0 Kudos
Reply
Loading...
Jump to solution

No, but check out the post immediately above yours....

lagagnon
Grasshopper

No, but check out the post immediately above yours....

0 Kudos
Reply
Loading...
Jump to solution

-- On my HITRON, when I tried that URL, all I see is: Adm...

mdk
Legendary Grand Master

@2110centre -- On my HITRON, when I tried that URL, all I see is:

Administration

Administration settings

Management / Diagnostics / Backup / Time Setting

Device Reset

IP Passthrough

Device Reset
You can reset all your settings to factory default values by Factory Reset.

Reboot Device Reboot
Restore Factory Default Settings Factory Reset
Help

__________________

 

Nothing about "USB".

 

0 Kudos
Reply
Loading...
Jump to solution

you won't see anything about usb because Shaw hid the lin...

2110centre
Grasshopper

you won't see anything about usb because Shaw hid the link to the page. I got there by changing the last digit in the url until this showed up. go to the admin page first then paste the url

shaw.png

Reply
Loading...
TALK TO US
We're here to help