My phone seems to only ring 2-3 times before sending caller to my voicemail, I need to increase the number of rings as it currently doesn't give me enough time to answer. phone is Alcatel go flip 3
Change the number of rings before Voicemail answers
Select from 2 to 9 as the number of rings.
(available to residential plans only)
Give it a try on your Shaw Mobile device.
If it does not work, contact Shaw ( www.shaw.ca/chat ) or 1-888-472-2222 to ask for assistance.
@barab -- I want to increase the number of rings ... before going to V.M.
I just connected to Shaw's online chat to ask your question, and immediately got connected to "Roger", and asked your question, stating that I have an iPhone, and got the response:
Dialing the numbers/symbols below will result in the phone ringing for 30 seconds before going to voicemail.
The default is 20 seconds, and the delay can be sent in 5 seconds increments. The maximum you can set it to is 30.
Pick up the phone receiver, wait for dial tone, and dial *94. You'll hear 3 beeps followed by dial tone. Enter the number of rings you want (between 2 and 9)
THIS WORKS FOR LANDLINE ALSO
This pattern (**61*ten-digit number *11*30#) works with my android phone too (Samsung galaxy A52) - but it depends on what your voicemail access number is (mine is 7783176408) and use it in place of the 10 digit number given by MDL. Thanks!
@yesmath -- yesterday, I had an online Chat with a Shaw Agent. They refused to give me a list of the "star codes" for Shaw Mobile customers. Their web-sites for Shaw Home Phone and Shaw Business do post a list.
Instead, I was asked "what do you want to do?", and I had to give a reply, to get a response of "not offered", or a specific Star Code.
Painfully obtuse of them!