2019 TV. Shaw Remote not working

[kirby_f997]

This is just curiosity.  I purchased a brand new (2019) version tv.  Specifically 

TCL 43S425

I tried basically every code with the Shaw remote (Champ?).  Unfortunately none of them work.  I am just wondering if there will be a code update anytime soon.  I am getting used to using two remotes, but it would just be nice if I only had to use one

[shaw-tony]

Hey kirby.f997,

Thank you for reaching out! Using two remotes is certainly not the best experience. I was able to locate a code here. Can you try "2434" to see if it works? Keep me posted.

Cheers,

Tony | Community Mod.

[kirby_f997]

Thank you for the prompt response.  I tried both codes listed (including that one).  No go

[shaw-tony]

  Ah, can you also try the standard way here? It should cycle through all possible codes. Alternatively, you can pick up a Champion remote to see if that will connect to your TV at your local Shaw retailer.

[kirby_f997]

Been there, done that.  I may just have to go in and get a different remote.  I just need for Mother Nature to stop with this 10 feet of snow per hour.  

[shaw-tony]

kirby.f997 I know the feeling

Hopefully one of our retail locations is close to you!

[Craigb]

Any update to this issue? I have this same brand of TV and neither 2434 or the scan works.

[mdk · Accepted solution]

I have two different Shaw-supplied remote-control devices.

On the back of the first:

1. Press and hold SETUP until LED light blinks twice.
2. Press TV POWER.
3. Press and hold OK.
4. Release OK key when TV turns off.

On the back of the second:

1. Turn device [namely your TV] on.
2. Press Device key: TV, DVD, etc.
3. Press and hold SETUP (LED blinks twice).
4. Press 9-9-1 (LED blinks twice).
5. Press POWER key.
6. Press CH+ repeatedly until device turns off.
7. Press SETUP when device turns off.
8. For more support go to www.URCsupport.com

Try each method, and tell us which one works for you.

[Greenie526]

Try 11756 

[Serenity-now]

This worked for me when the other codes and methods did not. Thank you.