Ignite Self Protect allows you to view live and recorded video of your home through indoor/outdoor cameras or a doorbell camera, managed from the Ignite HomeConnect (Shaw) app. These can be installed by yourself or as part of a professional installation.

Security camera

Install it yourself

You can install the Ignite Indoor/Outdoor Camera (Wired)TM yourself if you're comfortable doing so. Depending on where you want to install it, you may need the following tools and supplies:

  • Drill or impact drill (if drilling through masonry)
  • Drill bits: 1/8”, 1/4”, 5/8”
  • Stud finder
  • Mallet or hammer
  • Ladder or step stool
  • Silicone sealant.

If you need to extend the ethernet cable, you can use:

  • RJ45 Coupler (rated for indoor or outdoor location)
  • Cat 5e ethernet cable, with connectors (maximum 100ft length)

Before choosing between doing your own installation or having a professional do it, it's important to review the Ignite Indoor/Outdoor Camera installation instructions. If you're unable to complete the DIY process yourself, a professional installation is available.

Professional installation

Not comfortable installing the security camera yourself? Let us help! If at any point you’d rather switch to a Pro Install, you can contact us at 1-888-472-2222 to set up an appointment. Additional charges may apply.

Doorbell camera

Install it yourself

You can install the Ignite Doorbell Camera (Wired)TM yourself if you're comfortable doing so. Depending on your current doorbell setup, you may need the help of a licensed electrician before you can proceed with installation. When you're ready to install, you may need the following tools and supplies:

  • Drill or impact drill
  • 1/4” masonry drill bit (if drilling through masonry)
  • #2 Phillips screwdriver
  • Mallet or hammer
  • Needle-nose pliers
  • Ladder or step stool
  • Silicone sealant to seal the area around the doorbell against moisture.

Before choosing between doing your own installation or having a professional do it, it's important to review the Ignite Doorbell Camera installation instructions. If you're unable to complete the DIY process yourself, a professional installation is available.

Professional installation

Not comfortable installing the doorbell camera yourself? Let us help! If at any point you’d rather switch to a Pro Install, you can contact us at 1-888-472-2222 to set up an appointment. Additional charges may apply.

Sensors and other equipment

Install it yourself

You can install the Ignite Smart Motion SensorTM, Ignite Door/Window SensorTM and other sensors yourself with no additional tools or supplies needed.

Before choosing between doing your own installation or having a professional do it, you can review the installation instructions:

If you're unable to complete the DIY process yourself, a professional installation is available.

Professional installation

Not comfortable installing your sensors yourself? Let us help! If at any point you’d rather switch to a Pro Install, you can contact us at 1-888-472-2222 to set up an appointment. Additional charges may apply.


Labels (2)
Top